My expertise...in 3D CAD Design and Drafting.
1-3D CAD Design and Drafting for all types of direct fired heaters and WHRU's for Refineries,Petrochemical Plants, Gas Plants / LNG and GTL plants.
2-3D CAD Design and Drafting for all types of platform, structural, mechanical equipment, piping and coil.
MOHAS Industry Sdn.Bhd. core expertise in 3D CAD Design and Drafting includes the following types of advanced process heater systems:
• Steam reformers (utilising externally-developed
technology)
• Hydroprocessing charge heaters
• Hot oil heaters
• Fired reboilers
• Platformer heaters (UOP / IFP / Exxon)
• Ethylene cracking furnaces (utilising
externallydeveloped technology)
• Waste heat recovery units utilising turbine
exhaust gas
• Steam superheaters
• Crude vacuum furnaces
• High temperature pyrolysis heaters
• Helical coil radiant and convection heaters
• Vertical tube radiant and convection heaters
• Helical coil all-radiant heaters
• Vertical tube all-radiant heaters
• Vertical tube multi-cell heaters
• Horizontal tube single-cell cabin heaters
• Horizontal tube twin-cell cabin heaters
• Horizontal centre tube double-fi red heaters
Objectives and vision in design and drafting
Our Vision
We strive to establish a new global standard for innovation, quality and services with our highly capable professionals continue to deliver complete customer satisfaction through aftermarket sales and services.
Our Mission
Our mission is to provide innovative, practical and top-quality product with honesty and integrity creating trust with our clients while ensuring growth and continuous improvement.
Our goals
Our goals is to be recognized by our customers as an innovative, high quality and cost effective supplier, thus to be on cutting edge of the market.
Quality policy and objectives
We are committed to provide products and service to the highest stands of quality achievable to all customers.
To fulfill the policy, we prioritize:
Good Quality Services
Cost Competitiveness
Fast Action
Flexibility
On-time delivery.
And our QUALITY OBJECTIVES
To maintain the International Standard all of our products.
Customer returns less than 1% of sales
To train all technical team on TQC Concept
To produce high quality business
MOHAS Industry Sdn.Bhd.(968039 K) provide 3D CAD Design and Drafting services.Our charges is reasonable and negiotable.Quality that we provide is the best in the market.
1-3D CAD Design and Drafting services for all types of direct fired heaters and WHRU's for Refineries,
Petrochemical Plants, Gas Plants / LNG and GTL plants.
2-3D CAD Design and Drafting services for all types of platform, structural, mechanical equipment,
piping and coil.
3-3D CAD Design and Drafting services for all types of platform, structural, mechanical equipment,
piping which is not attach in heaters/WHRU's
4-3D Proposal Drawing/sales drawing for fired heaters/WHRU's(complete heaters modelling).
Lead time:minimum 2 hours,max:1 working days.Note:With all data and info provided.
5-We also provide 3D Details modelling for each section
CABIN HEATER/RADIANT SECTION(RADIANT FLOOR/RADIANT WALL/COIL/COIL SUPPORT/LINING/ANCHOR)
CONVECTION SECTION(CONVECTION WALL/COIL/TUBE SHEET/HEADER BOX/LINING/INSTRUMENT CONNECTION/MANIFOLD/MANIFOLD SUPPORT/BRACKET FOR PLATFORM/PLATFORM/HANDRAIL OR RELATED)
TRANSITION/LOWER STACK/MIDDLE OR UPPER STACK/BRACKET FOR PLATFORM
DAMPER/PLATFORM/BURNERS/ADDITIONAL
DRAWING REVISED/CHECKING/UPDATED-WITHIN 3 MONTH UPON SUBMITTED.
Refineries
■Crude Heaters
■Vacuum Heaters
■Cokers
■Hydrocrackers
■Visbreakers / Thermal Crackers
■Reboiler heaters
■Charge Heaters
■Platformers
Petrochemical Plants
■Steam Superheaters
■Crackers
■Aromatic Furnaces
■TiCl4 Heaters
■Oxygen Heaters
Gas Plants / LNG and GTL plants
■Hot Oil Heaters
■Regeneration Gas Heaters
■Natural Gas Heaters
■Steam Superheaters
■Waste Heat Recovery Units (WHRU’s)
■Reformers
HOW TO BUY THE RED WING OFFSHORE BAG
69100 RED WING LARGE OFFSHORE BAG
PRICE: RM425/UNIT
69101 RED WING SMALL OFFSHORE BAG
PRICE: RM325/UNIT
How to order
Select your type and qty to order
Made a payment to us. Please bank in to MOHAS Industry Sdn.Bhd.
Account Number: 12050001914104 CIMB Current Accounts
Email to us details of payment at mhasni@mohasindustry.com or fax to us at 0378323246.
Free delivery: KL & SELANGOR
RM50 outside Selangor or KL per delivery.
For oversea: Item deliver by currier services and charge perkg for each delivery.
Proforma invoice will be provided for payment purpose and before item delivered to your country.
SWIFT CODE: CIBBMYKL (outside Malaysia for payment arrangement)
69100 LARGE OFFSHORE BAG
69101 SMALL OFFSHORE BAG
69101 RED WING SMALL OFFSHORE BAG
PRICE: RM325/UNIT ONLY
MATERIAL:
Ballistic Nylon
FEATURES:
• Ideal for egress to helicopter bays
• Side-by-side full-open top zip for easy access
• Multiple side zip compartments for stowing boots, dirty clothes and other gear
• Includes backpack straps
69100 RED WING LARGE OFFSHORE BAG
PRICE: RM425/UNIT ONLY
MATERIAL:
Ballistic Nylon
FEATURES:
• Ideal for egress to helicopter bays
• Side-by-side full-open top zip for easy access
• Multiple side zip compartments for stowing boots, dirty clothes and other gear
• Sturdy in-line wheel system and locking telescopic handle with button operation
for easy transport
• Dimensions: 28" L (71 cm) x 16" W (41 cm) x 16" D (41cm)
Belt Conveyor Design Program
Follow us daily for all updated regarding new technologies of Belt Conveyor Design Program
The advantages about Helix Chute Design
Setup Bulk Material properties…
· Setup Material Particle Density
· Enter Particle size range – specify maximum and minimum particle diameter
· Specify Transfer Capacity or throughput in tonnes per hour
· Input material co-efficient of restitution and chute face properties such as restitution and friction
· Add multiple feed points with different materials – allowsfeeding onto already loaded belts.
Perform DEM Calculations & make a movie
Press Calculate to start the DEM calculations and watch as the particles are created in space and then fall onto the moving feed belt and then flow through the chute.
· Powerful calculations to predict the flow of particles through the chute allows particles to collide with each other and with the chute faces.
· Discrete Element Method (DEM) particle flow modeling
· Adjust the position of belts, pulleys, impact plates, chute liners and skirt plates to optimize the flow thorough the chute.
· Export the trace lines and Trajectories to CAD drawings
Record the calculations and produce trace reports and movies
Press Record …
· Record the Particle Flow inWindows Media Player .avi movie format
· Extract reports showing particle positions at each time step of the calculations
· Reports to show velocity of each particle at each time step, including a breakdown showing the velocity in each 3D axis.
· Trace a single particle trajectory as it collides with other particles and the chute faces, belts and other surfaces in the transfer
· Replay the particle trajectory, one step at a time in order to observe actual collision points with surfaces and rebound trajectories.
· Export the trace lines and Trajectories to CAD drawings
· Particle velocities are displayed by colour gradient as well as recorded
HELIX Chute Design
Setup Bulk Material properties…
· Setup Material Particle Density
· Enter Particle size range – specify maximum and minimum
particle diameter
· Specify Transfer Capacity or throughput in tonnes per hour
· Input material co-efficient of restitution and chute face
properties such as restitution and friction
· Add multiple feed points with different materials – allows
feeding onto already loaded belts.
Discharge Trajectory
Perform DEM Calculations & make a movie …
Press Calculate to start the DEM calculations and watch as the particles are
created in space and then fall onto the moving feed belt and then flow through the
chute.
· Powerful calculations to predict the flow of particles through the chute
allows particles to collide with each other and with the chute faces.
· Discrete Element Method (DEM) particle flow modeling
· Adjust the position of belts, pulleys, impact plates, chute liners and skirt
plates to optimize the flow thorough the chute.
· Export the trace lines and Trajectories to CAD drawings
Record the calculations and produce trace reports and movies
Press Record …
· Record the Particle Flow inWindows
Media Player .avi movie format
· Extract reports showing particle positions
at each time step of the calculations
. Reports to show velocity of each particle
at each time step, including a breakdown
showing the velocity in each 3D axis.
· Trace a single particle trajectory as it
collides with other particles and the chute
faces, belts and other surfaces in the transfer
· Replay the particle trajectory, one step at
a time in order to observe actual collision
points with surfaces and rebound
trajectories.
· Export the trace lines and Trajectories to
CAD drawings
· Particle velocities are displayed by colour
gradient as well as recorded
We provide technical services & training
CAD/CAM & Engineering Drawing Training.
Description:
We offers custom training. The training can include
items such as problem solving, specialized group
training, file management and follow up training.
It is offered for customers and companies to get
specialized training specific to their industry or line
of work.I will train you in your place. Make sure
your company or your own PC already install with
license software.I only help you to improve your 3D
CAD Engineering skills.
The following shows a few types of custom training
offerings:
•Onsite Training
.Evening Courses
.Weekend Training
.One on One Training
.Group/Company Specific Training
Class Includes:
-Custom hands on training
-Each student has their own workstation/notebooks
Cost
-With negotiable cost.
Prerequisites:
MECHANICAL DESIGN EXPERIENCE
STRUCTURE DESIGN EXPERIENCE
Knowledge of or experience with the WindowsTM operating system
The class will be conducted using Windows XP/VISTA
Onsite Services Offered:
•Software Implementation
•Onsite Consulting
Training Ideas:
If you are interested in scheduling a custom training class please send an email to:
mhasni@mohasindustry.com
note:for CAD user in MALAYSIA only.
Technical Services
MOHAS offer a wide range of technical services to help you meet your deadlines.Combining our technical services with the wide range of services that our customers provide,we can help you at almost any stage of product development.This combination of capabilities allows us to provide you with anything from specific services all the way to start-to-part services for your designs.
Technical services offered:
3D Drafting
3D Detail Modelling
CAD Design
CAD Drafting
Structural and Mechanical Design
Special Purpose Machine
Jigs andFixture
Automation and Robotics
Material Handrail and Conveyor System
Engineering
File conversion
Refineries 
Posts
